DWS Systems
029X
Build: 150×150×150 mmVolume: 3.38 LXY res: 25 µmLight: Solid-State BlueEdge Laser (405nm)
MSRP
$75k
Where to buy
No active listings right now.
Best use cases
Luxury watch components, fine filigree jewelry, micro-mechanical mechanisms
Full specifications
Build
- Build envelope
- 150×150×150 mm
- Build volume
- 3.38 L
- Process
- Industrial SLA
Light & optics
- Light/laser source
- Solid-State BlueEdge Laser (405nm)
- Optical engine
- Dual-Axis High-Accuracy Galvo
- Light/laser power
- 450 mW
- Optical wavelength
- 405 nm
- XY resolution
- 25 µm
- Min layer thickness
- 10 µm
- Heated vat temp
- 25 °C
- Peeling mechanism
- TTT Rotating Resin Vat
Resin handling
- Vat capacity
- 3 L
- Open material architecture
- No
- Automated resin handling
- Y
- Compatible resin families
- DWS Proprietary Engineering, Jewelry & Dental Resins
Physical
- Max print speed
- 35 mm/h
- Power consumption
- 500 W
- Machine weight
- 140 kg
- Best use cases
- Luxury watch components, fine filigree jewelry, micro-mechanical mechanisms
Data quality
- Data confidence
- Not yet verified
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$75k
No listing