Elegoo
Mars 3 Pro
Build: 143×89×175 mmVolume: 2.23 LXY res: 35 µmLight: COB UV Light Source + Fresnel Lens
MSRP
$209
Where to buy
No active listings right now.
Best use cases
Highly detailed miniatures, jewelry mockups, hobby sculpts
Full specifications
Build
- Build envelope
- 143×89×175 mm
- Build volume
- 2.23 L
- Process
- mSLA / LCD
Light & optics
- Light/laser source
- COB UV Light Source + Fresnel Lens
- Optical engine
- 6.6-inch 4K Mono LCD
- Light/laser power
- 350 mW
- Optical wavelength
- 405 nm
- XY resolution
- 35 µm
- Min layer thickness
- 10 µm
- Heated vat temp
- 25 °C
- Peeling mechanism
- FEP 2.0 (PFA) Film Peeling
Resin handling
- Vat capacity
- 0.5 L
- Open material architecture
- Yes
- Automated resin handling
- N
- Compatible resin families
- Standard, ABS-Like, Water-Washable
Physical
- Max print speed
- 50 mm/h
- Power consumption
- 55 W
- Machine weight
- 5.5 kg
- Best use cases
- Highly detailed miniatures, jewelry mockups, hobby sculpts
Data quality
- Data confidence
- Not yet verified
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$209
No listing