Peopoly
Phenom Prime
Build: 277×156×400 mmVolume: 17.28 LXY res: 51 µmLight: High-Power UV LED Array
MSRP
$2.5k
Where to buy
No active listings right now.
Best use cases
Commercial model shops, large visual mockups, batch manufacturing batches
Full specifications
Build
- Build envelope
- 277×156×400 mm
- Build volume
- 17.28 L
- Process
- mSLA / LCD
Light & optics
- Light/laser source
- High-Power UV LED Array
- Optical engine
- 12.6-inch 5.5K Monochrome LCD
- Light/laser power
- 800 mW
- Optical wavelength
- 405 nm
- XY resolution
- 51 µm
- Min layer thickness
- 20 µm
- Heated vat temp
- 25 °C
- Peeling mechanism
- High-Efficiency Release Vat Film
Resin handling
- Vat capacity
- 2.5 L
- Open material architecture
- Yes
- Automated resin handling
- N
- Compatible resin families
- Deft, C-Tough, High-Impact, Lost-Wax Castable
Physical
- Max print speed
- 100 mm/h
- Power consumption
- 250 W
- Machine weight
- 32 kg
- Best use cases
- Commercial model shops, large visual mockups, batch manufacturing batches
Data quality
- Data confidence
- Not yet verified
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$2.5k
No listing